• <acronym id="msgpf"><th id="msgpf"></th></acronym>
    <noscript id="msgpf"><tt id="msgpf"><div id="msgpf"></div></tt></noscript>
      1. <track id="msgpf"><delect id="msgpf"></delect></track>

        <track id="msgpf"><code id="msgpf"></code></track>

          >
          >
          7105及2208(連幫中底料)說明書

          微信二維碼

          官網二維碼

          ?2018 德州市鑫華潤科技股份有限公司  版權所有

          公司主要從事特種功能性鞋靴鞋底的研發與生產,產品涵蓋特種軍需功能鞋、特種環境制式鞋、特種環境作業鞋、勞保鞋等多個領域,公司產品研發、市場占有率等綜合實力位居全國同行業前三甲。


          公司地址:

          山東省德州市德城區雙一路28號


          公司電話:

          0534-2601366

          德州市鑫華潤科技股份有限公司


          公司郵箱:

          xhrchina@vip.163.com

          7105及2208(連幫中底料)說明書

          產品描述

               德州市鑫華潤科技股份有限公司A/B料產品說明書
              De Zhou Xin HuaRun Technology CO., LTD.
            A/B Shoe Materials Product Manuals

          1.特點(Feature :連幫鞋底用料(Polyester polyol for even shoes soles
          2.原液特性: Typical properties of PU resin:


          品名
          Name of products

          外觀
          Appearance
          (40)

          粘度
          Viscosity
          (mPas/40)

          密度
          Density
          (g/cm3/40)

          包裝
          Package
          (kg)

          保質期
          Shelf life
          (month)

          貯存溫度
          Storage temperature
          ()

          HR-P-7105

          液狀
          Liquid

          1000±200

          1.2±0.02

          17 (Net)
          藍標簽
          Blue label

          6

          20~25

          HR-I-2208

          液狀或蠟狀Liquid or waxy

          300±50

          1.20±0.02

          20 (Net)
          黃標簽
          Yellow label

          3

          20~25

          3.催化劑與輔助劑Catalyst & Additives:
          催化劑HR-C-3的加入量為:250±10g/18kg,水的加入量為:60-80g/18kg
          The adding amount of HR-C-3 should be 250±10g/18kg, the adding amount of water should be 60-80g/18kg.
          4.成型條件及物性值:Typical processing parameters & Typical Properties:


          反應性
          Reaction
          characteristics

          技術參數
          Technical
          parameters

          項目
          Items

          物性值
          Physical
          properties

          參考配比
          A+C/B Mix ratio (By Weight)

          100/80-85

          成型密度(g/m3)
          Molded density (g/m3)

          0.5-0.55

          使用溫度(℃)
          Material Temperature (℃)

          38-42/38-42

          硬度
          Hardness

          A型Asker A

          50-55

          C型Asker C

           

          乳白時間(s)
          Cream time (s)

          5-7

          拉伸強度(MPa)
          Tensile strength (MPa)

          ≥5.0

          升起時間(s)
          Rise time (s)

          30-35

          伸長率(%)
          Elongation (%)

          ≥400

          自由泡密度(g/m3)
          Free rise foam density (g/m3)

          0.25-0.3

          撕裂強度(直角)(kN/m)
          Tear strength (right angle) (kN/m)

          ≥6.0

          金屬模具溫度(℃)
          Mold temperature (℃)

          45-55

          耐折性(常溫25℃×10萬次)
          Folding endurance (25℃×10 million times)

          無裂紋

          脫模時間(min)
          Demould time (min)

          3-4

          DIN耐磨
          DIN abrasion resistance

          ≤200

          • 配合比率是以最佳配比值為基礎,此配比值會隨添加的顏料助劑種類和添加量不同而變化。The mixing ratio is based on the best proportion, this ratio will be changed with the kind of dye and its adding amount.
          • 自由泡沫密度會依季節(溫度,濕度)的不同而變化。Free rise density may vary with temperature & humidity.
          • 該物性數據是對6mm厚的試驗片測試獲得的數據。These physical data are acquired by testing a sample of 6mm thick.
          • 以上數據僅供參考,具體數據以實際操作為準,如需其他物性指標,請與我公司聯系。Data listed above are just for reference.  The detail data are subject to practice operation. If other physical properties are required, please contact us.
          未找到相應參數組,請于后臺屬性模板中添加
          暫未實現,敬請期待
          暫未實現,敬請期待
          下一篇
          久久精品午夜一区二区福利

        1. <acronym id="msgpf"><th id="msgpf"></th></acronym>
          <noscript id="msgpf"><tt id="msgpf"><div id="msgpf"></div></tt></noscript>
            1. <track id="msgpf"><delect id="msgpf"></delect></track>

              <track id="msgpf"><code id="msgpf"></code></track>