• <acronym id="msgpf"><th id="msgpf"></th></acronym>
    <noscript id="msgpf"><tt id="msgpf"><div id="msgpf"></div></tt></noscript>
      1. <track id="msgpf"><delect id="msgpf"></delect></track>

        <track id="msgpf"><code id="msgpf"></code></track>

          >
          >
          1302及2202(鞋墊料)說明書

          微信二維碼

          官網二維碼

          ?2018 德州市鑫華潤科技股份有限公司  版權所有

          公司主要從事特種功能性鞋靴鞋底的研發與生產,產品涵蓋特種軍需功能鞋、特種環境制式鞋、特種環境作業鞋、勞保鞋等多個領域,公司產品研發、市場占有率等綜合實力位居全國同行業前三甲。


          公司地址:

          山東省德州市德城區雙一路28號


          公司電話:

          0534-2601366

          德州市鑫華潤科技股份有限公司


          公司郵箱:

          xhrchina@vip.163.com

          1302及2202(鞋墊料)說明書

          產品描述

               德州市鑫華潤科技股份有限公司A/B料產品說明書
              De Zhou Xin HuaRun Technology CO., LTD.
            A/B Shoe Materials Product Manuals

          1.特點(Feature :高回彈中底用料(Polyester polyol for midsoles
          2.原液特性: Typical properties of PU resin:


          品名
          Name of products

          外觀
          Appearance
          (40)

          粘度
          Viscosity
          (mPas/40)

          密度
          Density
          (g/cm3/40)

          包裝
          Package
          (kg)

          保質期
          Shelf life
          (month)

          貯存溫度
          Storage temperature
          ()

          HR-P-1302

          液狀
          Liquid

          900±200

          1.2±0.02

          18 (Net)
          藍標簽
          Blue label

          6

          20~25

          HR-I-2202

          液狀或蠟狀Liquid or waxy

          300±50

          1.20±0.02

          20 (Net)
          黃標簽
          Yellow label

          3

          20~25

          3.催化劑與輔助劑Catalyst & Additives:
          催化劑HR-C-3的加入量為:300±20g/18kg,水的加入量為:120-160g/18kg
          The adding amount of HR-C-3 should be 300±20g/18kg, the adding amount of water should be 120-160g/18kg.
          4.成型條件及物性值:Typical processing parameters & Typical Properties:


          反應性
          Reaction
          characteristics

          技術參數
          Technical
          parameters

          項目
          Items

          物性值
          Physical
          properties

          參考配比
          A+C/B Mix ratio (By Weight)

          100/65-70

          成型密度(g/m3)
          Molded density (g/m3)

          0.35-0.4

          使用溫度(℃)
          Material Temperature (℃)

          38-42/38-42

          硬度
          Hardness

          A型Asker A

          30-35

          C型Asker C

          45-50

          乳白時間(s)
          Cream time (s)

          5-7

          拉伸強度(MPa)
          Tensile strength (MPa)

          ≥3.0

          升起時間(s)
          Rise time (s)

          30-35

          伸長率(%)
          Elongation (%)

          ≥300

          自由泡密度(g/m3)
          Free rise foam density (g/m3)

          0.15-0.18

          撕裂強度(直角)(kN/m)
          Tear strength (right angle) (kN/m)

          ≥10.0

          金屬模具溫度(℃)
          Mold temperature (℃)

          45-55

          耐折性(常溫25℃×10萬次)
          Folding endurance (25℃×10 million times)

          無裂紋

          脫模時間(min)
          Demould time (min)

          3-4

          回彈率(%)
          Resilience ratio (%)

          ≥15%

          • 配合比率是以最佳配比值為基礎,此配比值會隨添加的顏料助劑種類和添加量不同而變化。The mixing ratio is based on the best proportion, this ratio will be changed with the kind of dye and its adding amount.
          • 自由泡沫密度會依季節(溫度,濕度)的不同而變化。Free rise density may vary with temperature & humidity.
          • 該物性數據是對6mm厚的試驗片測試獲得的數據。These physical data are acquired by testing a sample of 6mm thick.
          • 以上數據僅供參考,具體數據以實際操作為準,如需其他物性指標,請與我公司聯系。Data listed above are just for reference.  The detail data are subject to practice operation. If other physical properties are required, please contact us.
          未找到相應參數組,請于后臺屬性模板中添加
          暫未實現,敬請期待
          暫未實現,敬請期待
          上一篇
          下一篇
          久久精品午夜一区二区福利

        1. <acronym id="msgpf"><th id="msgpf"></th></acronym>
          <noscript id="msgpf"><tt id="msgpf"><div id="msgpf"></div></tt></noscript>
            1. <track id="msgpf"><delect id="msgpf"></delect></track>

              <track id="msgpf"><code id="msgpf"></code></track>